What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
15.06.2025 09:11

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The other is “what does a “fuse” do?”
There are two important concepts here.
[image of Common-mode choke]
Edit 2024–10.
But it can get overloaded, and no longer works.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
eight
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Can a cop pull you over walking home asking why you are out so late?
Barnstars:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What are some tips for a girl with low self-esteem to start dating?
what exactly is a ‘surge’ protector?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
It seems Mohan does not understand the difference between a comment and an Answer.
Do you suck dicks with no reciprocation?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Who is the dumbest law enforcement officer you have ever encountered?
2024–10–10[John johnson John Johnson ]
He then describes Rainy Season and Lightning.
What is lightning?
Is the 4B movement's aggressiveness against men for seeing women as mantelpieces valid?
This is where the MOV conducts again, and dissipated the energy.
I post the exact comment here.
A circuit breaker is similar, but is resettable.
Is TikTok becoming a platform for soft porn?
but this device (an Inductor) … impedes the rapid changes in the current.
A fuse is a non-resetable over current circuit protector.
The bolt then partially travels down the line to your home.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Upvotes:
Have you ever had a bad gut feeling about someone and it was right?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
One
Why is the covert narcissist actively avoiding me when they see me everyday?
An AC voltage/ current source, and an ac inductive load.
[old diagram got deleted by accident]
nine
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
For this case there are devices called Metal oxide varistors (MOV).
In schematic diagrams this is the symbol for a fuse:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
He then describes the function of a fuse.
Because the load is inductive, the current lags the voltage.(by a bit).
Who are your 5 or so favorite Quora people?
There are three different concepts here that are getting confused.
(Dc diagram shown, AC is similar).
He then asserts :
At least they know the answer if they wanted it.
2024–10–16 [ OO OLAOYE OYEBODE ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
Now when you have a certain ac resistance, then a current flows in a loop.
At one ohm, the resistor has a maximum of 1 watt power.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What does a fuse do?
So, the voltage could go up to 500 volts, and the fuse will not open up.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This one hit behind the barn.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
2024–10–14 [Omar Gharbi Omar Gharbi ]
But… the neutral is now “floating” because of the 1 ohm resistance.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The third is lightning and “how it gets conducted into a home.”
Here is a simplified AC power diagram.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
These are simplified answers to the original question, and does not change anything I wrote above.
First Sentence:
so, what happens?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
a photo is worth a thousand words.
This is 'the assistant's answer'
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
the problem then depends on "how fast does the fuse operate?".
but I think this circuit , shows a few more pieces.
One is “what exactly is in a ‘surge protector’ ? ”
The MOV will conduct when the voltage exceeds 50% of line voltage.
These devices are installed between the “hot” and “neutral” and protective ground.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
It also is a device that limits the change in current flow.
This device then solves the entire problem.